Thursday, September 13, 2007

Variable Torque Mangement 4-Wheel Drive System (VTM-4™) Explained

After studying various all-wheel- and four-wheel-drive systems offered by the wide variety of pickups on the market today, Ridgeline engineers concluded that virtually every one had functional shortcomings and was undesirably bulky and heavy. The direct result of that research was to use Honda's innovative fully automatic VTM-4 system. This fully automatic 4WD system is the best match for the Ridgeline owner and proactively distributes torque to all four wheels as needed. This system provides front-wheel drive for dry-pavement cruising conditions and engages all-wheel drive when needed to improve stability or maneuverability. Unlike many competitive systems that use an engagement strategy triggered by wheel slippage, the Ridgeline's VTM-4 system anticipates the need for all-wheel drive and engages the rear wheels before slippage begins. Additional torque is redistributed to the rear for improved performance during acceleration, especially on low friction surfaces and during towing. In addition, the VSA system provides a limited-slip differential effect by applying braking force to a slipping front wheel thereby directing driving force to the wheel with more grip.

Another special feature is a "VTM-4" lock button, located on the instrument panel, which temporarily holds engagement of both rear wheels to aid traction.

There are three distinct modes of VTM-4 engagement. The first – called the acceleration torque control (ATC) mode – is unique to this system. It works even on dry pavement to proactively distribute driving torque to all four wheels as the Ridgeline accelerates from a stop to cruising speed. One notable benefit of this mode is that traction is immediately available to move the vehicle from rest through a slippery intersection before slippage occurs. (Once a wheel slips, the traction available for forward propulsion and lateral restraint is significantly diminished.)

A second advantage is that apportioning drive torque among all four wheels greatly diminishes the likelihood of torque steer. Handling dynamics are also improved. Reducing the propulsive force carried by the front tires leaves more adhesion for steering the vehicle into a tight bend or for holding cornering arc in the middle of a turn. In other words, the Ridgeline's dynamic balance is greatly enhanced by ATC logic.

Rear wheel torque rises smoothly from zero to the optimum setting in proportion to vehicle acceleration (both forward and reverse). At higher speeds, the front wheels are capable of providing the desired thrust with excellent handling so torque delivered to the rear wheels automatically diminishes with speed. While cruising, all driving torque is delivered by the front wheels in the interests of smoothness, quietness, and fuel efficiency.

The second engagement mode uses wheel slippage control logic. If the difference in rotational speed between front and rear wheels rises because of a slippery surface or poor traction at the front of the vehicle, that condition is detected by wheel-speed sensors which are monitored by VTM-4's ECU. In response, the ECU commands an increasing amount of torque for the rear wheels. Torque is proportional to both slip rate and the rate at which the slip rate is increasing. This operation is similar to conventional slip-based all-wheel-drive systems already on the market.

The third mode of all-wheel-drive engagement activates when the driver presses the lock button mounted on the instrument panel. The maximum amount of rear-drive torque is locked in until the vehicle gets moving and exceeds six mph, at which time rear drive torque is gradually diminished. By 29 km/h, the lock mode is fully disengaged. When vehicle speed drops below 29 km/h, the lock mode automatically reengages. The shift lever must be in the first, second, or reverse-gear position to use the lock mode.

The maximum torque delivered to the rear wheels allows the Ridgeline to claw up a 28-degree (53-percent slope) dirt grade. On a split-mu (split-friction) grade (different amounts of traction at each wheel), VTM-4 automatically provides sufficient rear-wheel torque to help the vehicle climb steep and slippery terrain such as a steep driveway with patches of snow and ice.

3 comments:

Scott said...

Welcome to the blogosphere Damien! Love reading car news, i get like 5 magazines a month.

Can't wait to read more of what you got on Honda's. Still Lovin' my SI

Scott Billeck

p.s. Thanks for the spot in your shout outs section.

Anonymous said...

І have been eхploгing for a little bit for any high quality articles oг blog postѕ оn thіѕ sοrt of aгea .
Eхplοгing in Yahoo I at last stumblеd upon this
webѕіte. Reading this іnfo Sο i am glad to convey that
Ӏ've an incredibly good uncanny feeling I discovered exactly what I needed. I such a lot unquestionably will make sure to don?t put out of your mind this web site and provides it a glance regularly.
Feel free to surf my weblog :: bet at home

Anonymous said...

Everуthing publіshed was actuаlly verу гeasоnаble.

But, considеr this, ѕuppοsе уou adԁed a lіttle
infοrmation? Ι meаn, I don't wish to tell you how to run your blog, but what if you added a post title that grabbed a person's attentіon?
I mеan "Variable Torque Mangement 4-Wheel Drive System (VTM-4�) Explained"
іs kіnda plain. Υоu could glancе аt
Yahoo's front page and note how they create news headlines to get people to click. You might try adding a video or a picture or two to grab people interested about everything'vе written.
Just mу oрinion, it ωoulԁ bring your posts a lіttle bit more intеresting.
Also visit my web-site - bankrepossessedcarsforsale.org